Little Paw Series

The Little Brother of the BIG PAW is coming!

Torque-Power are soon to release our new single plane manifold series for VN-VT Holdens. Dubbed the 'Little Paw Series', the first manifolds available will be the 'Little Paw' for 4150 plenums and the 'Pro Paw' for dominator plenums.

The Little Paw design has been based on the Torque-Power Big Paw 434-461 single plane manifold #007. This new plenum and smaller cross-sectional runner volume design, which is still larger than the TP single plane #002 manifold, will suit High Horse Power 355, 383 and 400 cubic inch engines.
This manifold will accommodate either Dominator or 4150 base Carburetors without the need of adaptors. The Little Paw Series will suit the standard Holden deck height of 8.875" and will operate at its optimum between 4500 and 8500 rpm. Little Paw manifolds can be used with ported factory cast iron or aftermarket aluminium late model V/8 heads, such as Yella Terra -9 and the new to be released MID HIGH PORT head from Torque-Power in 2010.
Intake Runners on the Little Paw Series as cast have a 2.22 square-inch cross sectional area at the port face.

Photos and information will be updated on the site mid to late January 2010, with testing to be undertaken on a 383 cubic inch motor in February/March 2010.

Get some sleep while you can.... Little Paw is coming......!





		Torque-Power Little Paw Manifold Series (Up to 8500 rpm) to suit standard holden v/8 blocks




			The Little Brother of the BIG PAW is coming! Torque-Power are soon to release our new single plane manifold series for VN-VT Holdens. Dubbed the 'Little Paw Series', the first manifolds available will be the 'Little Paw' for 4150 plenums and the 'Pro Paw' for dominator plenums. The Little Paw design has been based on the Torque-Power Big Paw 434-461 single plane manifold #007. This new plenum and smaller cross-sectional runner volume design, which is still larger than the TP single plane #002 manifold, will suit High Horse Power 355, 383 and 400 cubic inch engines. This manifold will accommodate either Dominator or 4150 base Carburetors without the need of adaptors. The Little Paw Series will suit the standard Holden deck height of 8.875" and will operate at its optimum between 4500 and 8500 rpm. Little Paw manifolds can be used with ported factory cast iron or aftermarket aluminium late model V/8 heads, such as Yella Terra -9 and the new to be released MID HIGH PORT head from Torque-Power in 2010. Intake Runners on the Little Paw Series as cast have a 2.22 square-inch cross sectional area at the port face. Photos and information will be updated on the site mid to late January 2010, with testing to be undertaken on a 383 cubic inch motor in February/March 2010. Get some sleep while you can.... Little Paw is coming......!